HPV4142 HYDRA-PUSH MANURE SPREADER

4100 Series Manure Spreader Information

  • Both sizes are available with a choice of horizontal or vertical beaters.
  • Vertical beaters feature “REVERSE FLIGHTING” on the top 21″ of the beater flighting. This patented feature allows for an even spread pattern of material.
  • All Hydraulic Push models use solid virgin grade poly with UV inhibitor, for the floor and sides allowing less friction.
  • The hydraulic endgate has 2 cylinders with ⅜″ hose and pipe for faster operation in cold weather.
  • Horizontal beater models feature a top beater as standard equipment.
  • Heavy duty rectangular tubing is used for the pole to ensure strength and long life. Structural channel floor supports spaced 9 ½″ apart are used for maximum floor support.
  • The HP’s PTO beater drive system is driven by the unique center drive system that consists of a straight shaft off the PTO underneath the manure spreader to an angle gearbox in the rear, and over to the beater drive sprocket.
  • #80 chains are used for strength and long life and easy open shields makes lubrication easy.
  • The Hydraulic Push-Off System on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable and the beater assembly is removable for stockpiling manure.
  • Removal of either beater assembly is done by simply removing the mounting bolts, a drive chain and disconnecting the auto-oiler hose on the vertical beater model.
  • Beater gearboxes are safely mounted on the top side of the vertical beaters rather than the bottom to avoid being destroyed by foreign objects.
  • An Auto-oiler for the vertical beater drive chains is standard equipment.
  • The vertical beater features a quick release clean out pan.
HPV4142
CAPACITY – OLD RATING 425 Bushel
CAPACITY CU. FT, STRUCK LEVEL 270
SIDE LOADING HEIGHT 61 ¼″
2ND OR VERTICAL BEATER HEIGHT 104 ½″
HEIGHT-TOP OF HYD. END GATE (W/O HOOK) 65″
HEIGHT-TOP OF SCREEN (VERT. BEATER ONLY) 98″
INSIDE WIDTH 72″
INSIDE LENGTH 16′
INSIDE DEPTH 34″
OVERALL WIDTH W/TIRES 10′ 2″
OVERALL LENGTH 27′ 5″
STANDARD NUMBER OF BEATERS 2
HORIZONTAL BEATER DIAMETER/LOWER N/A
HORIZONTAL BEATER DIAMETER/UPPER N/A
VERTICAL BEATER DIAMETER 34″
REPLACEABLE BEATER PADDLES YES
REMOVEABLE BEATER ASSEMBLY YES
HYDRAULIC PUSH CYLINDER DIAMETER 3 ½″
HYDRAULIC PUSH CYLINDER HOSE DIAMETER ⅜″
HUB 8 Bolt
SPINDLE SIZE 3″
TIRE SIZE – STANDARD 425 x 22.5
TIRE SIZE – OPTIONAL 19L x 16.1 10 Ply
HYDRAULIC END GATE Standard
CYLINDERS ON HYDRAULIC END GATE 2 W-⅜″ Hose
REAR PAN Standard
JACK Standard
WOOD SIDE RAILS Standard
WEIGHT W/TIRES 7,900#
PTO CHOICES
540 RPM PTO
w/ OVER RUNNING TORQUE LIMITING CLUTCH
YES
1,000 PRM PTO
1¾ or 1¾ w/ SHEAR BOLT PROTECTION
YES
1,000 PRM PTO
1¾ or 1¾ w/ OVER RUNNING TORQUE LIMITING CLUTCH
YES

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.