2100 Series V-Rakes

Available in 8, 10, & 12 Wheel Models

  • High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
  • An Adjustable Hitch allows you to level the rake for efficient raking.
  • Right and left side raking is done easily by turning either one of the wing transport valves off.
  • A 49″ Center Kicker Wheel is optional on all Action Rakes.
  • The hitch jack is used to adjust the windrow width as shown.
  • Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
  • The operator can adjust the fine tune spring to allow proper rake wheel down pressure on each arm of either rake.
2108
NUMBER OF RAKE WHEELS 8
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 10′
TRANSPORT LENGTH 17′
TRANSPORT HEIGHT IN TRANSPORT POSITION 86″
RAKING WIDTH 15′ – 19′
WINDROW WIDTH ADJUSTMENT 3′ – 5′
NO. OF RAKING POSITIONS W/TRANSPORT POSITION 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Adjustable Tension Spring
ACTION CYLINDER – RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 1,400#
CENTER KICKER WHEEL N/A
2110
NUMBER OF RAKE WHEELS 10
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 10′ 8″
TRANSPORT LENGTH 19′
TRANSPORT HEIGHT IN TRANSPORT POSITION 101″
RAKING WIDTH 18′ – 22′
WINDROW WIDTH ADJUSTMENT 4′ – 6′
NO. OF RAKING POSITIONS W/TRANSPORT POSITION 10
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Adjustable Tension Spring
ACTION CYLINDER – RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 1,670#
CENTER KICKER WHEEL Optional
2112
NUMBER OF RAKE WHEELS 12
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 12′
TRANSPORT LENGTH 21′ 6″
TRANSPORT HEIGHT IN TRANSPORT POSITION 105″
RAKING WIDTH 20′ – 24′
WINDROW WIDTH ADJUSTMENT 4′ – 6′
NO. OF RAKING POSITIONS W/TRANSPORT POSITION 10
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Adjustable Tension Spring
ACTION CYLINDER – RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 1,860#
CENTER KICKER WHEEL Optional

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

 

A 49″ Center Kicker Wheel is optional on the 2100, and 3100 Series Rakes.

There was clearly a definite simply click within the keyless functions whenever environment time, and patek philippe replica the date quickset was very irratic, the two typical troubles in order to Seiko 62xx calibres while don begins to placed in.