header3
 
Main Menu
 
H&S 170 Grinder-Mixer
The H&S 170 Grinder-Mixer offers the convenience and dependability of hydraulically operated feedmaking on your farm.
More Equipment
H&S Grinder Mixer
ADDITIONAL OPTIONS AVAILABLE:
*Swinging Intake Auger (SIA)
*Digi-Star EZ 2000 Electronic Scale
*Digi-Star EZ 3200 Electronic Scale w/External Horn
*3' & 6' Dischange Auger Extensions
*Mill Screens
*Transport Lighting Kit
*Fenders


170 Grinder-Mixer The H&S 170 Grinder-Mixer offers the convenience, dependabilty and smoothness of hydraulically operated feed making on your farm. The feeding attachments and unloading mechanisms are all driven hydraulically - No drive belts, chains or gear clusters to wear out.
The self-contained hydraulic system includes a pulley-driven pump, cyclonic reservoir for maximum hydraulic cooling and a pressure relief valve. Two full length windows and a rear porthole window allow the operator to see feed levels.
The PTO driven 21'' grinder mill features an eight "A" section banded V-belt for a positive drive and a quick release pin (P) to disengage the mill.
An adjustable slip clutch on the auger rotation provides protection if foreign objects are encountered.
The hydraulic motor provides a flow of 10.5 GPM with a 10 micron oil filter. The Cyclonic Reservoir provides circulation to cool the oil.
The 300 degree swing radius of the unloading auger allows repositioning of the discharge auger from one side of the machine to the other without moving the grinder-mixer.
A 14'' mixing auger with a 30'' base provides superior mixing uniformity.
A slide style door provides easy opening for unloading. The discharge and optional intake augers each have a variable speed control.
Sixty-six thin, four way steel alloy reversible hammers reduce horsepower requirements, cutting the material - not pounding it. Cutting action occurs against the throat plate while a suction fan pulls the ground feed through the screens. This allows for a more uniform mix for ration control. Twelve screens are available with sizes ranging from 1/8'' to 2'' in diameter to grind the grain to the consistency that you desire. 21'' mill.
An optional 12'' diameter by 7' long hydraulic variable speed swinging intake auger (SIA) moves grain, ear corn, shelled corn, or other miscellaneous grain into the mill with ease, and the hydraulic control allows you to keep the mill at maximum capacity.
A 23'' wide x 18'' long supplement hopper with a sack cutter is side mounted 35'' above the ground.
A Digi-Star EZ 2000 scale or a EZ 3200 scale with external horn are optional.
A screen holder is standard equipment.
A hydraulic hose holder is standard equipment.
Two heavy-duty 4'' x 18'' magnets remove any metal that may accidentally mix with the material entering the mill.
GENERAL SPECIFICATIONS
Tank Capacity - Bushel 135
Tank Capacity - Cubic Ft. 170
Tank Diameter 72''
Diameter of Mixing Auger 14'' Diameter w/30'' Base
Ladder Standard - Front Mount Over Mill
Tank Windows 2 - Full Length & 1 Port Hole Style
Overall Height 10' 7''
Overall Width 7' 9'' w/o Auger Feeder
Overall Length 15' 8''
Ground Clearance 11' 5"
Supplement Hopper 23'' W x 18'' L - 35'' Above Ground
Feeder Gravity Hopper or Optional Swinging Intake Auger (SIA)
PTO Drive 540 or 1000 RPM
H.P. Requirement 540 RPM up to 115 HP - 1000 RPM up to 145 HP
Tires 12.5L - 15 - 20 Ply
Jack Standard
Weight w/Auger Feeder 3,600#
OPTIONAL SWINGING INTAKE AUGER (SIA)
Auger Feeder Length 84''
Auger Diameter 12''
Infeed Hopper 42'' w/Fold-In-Flare - Adjustable as low as 20''
Drive Direct Drive Independent Hydraulic Motor
MILL
Hammermill Width 21''
Cylinder Diameter 20''
Grinder Drive 8 ''A'' Section Banded V-Belt
Grinder Hammers 66-4 Way Reversible Steel Alloy  
Grinder Screen Area 600 Square Inches
Throat Magnet 2 - 4''x18''
Cylinder Speed 2700 RPM
DISCHARGE AUGER
Unloading Auger Tube Diameter 8''
Unloading Auger Length 12'
Unloading Auger Rotation 300 Degrees
Unloading Auger Reach Standard 19' @ 53 Degrees
Unloading Auger w/3' Extension N/A
Unloading Auger w/6' Extension N/A
DRIVE SYSTEM
Self-Contained Includes Pully-Driven Pump, Reservoir & Pressure Relief Valve
Pump Pressure 2,600 PSI Maximum
Oil Flow 10.5 G.P.M.
Hydrualic Reservoir Cyclonic Reservoir
Oil Filter 10 Micron



Adobe Acobat Reader is required for brochure. Get it here free.



Spreaders Mergers Rakes Bale Racks Bale Wrapper
Forage Boxes Forage Blower Feeder Wagons Farm Wagons Trailers
© 2010 H&S Manufacturing Company, Inc. 2608 S. Hume Avenue PO Box 768
Telephone (715) 387-3414 Marshfield, WI 54449
Design By Otter Creek