X-15 Rake

  • The H&S X-15 Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of the crop.
  • The variable main frame width adjustment opens symmetrically. Hitch height and beam fore and aft tilt are controlled by a simple ratchet jack.
  • Hydraulic adjust beam angle as standard equipment.
  • Tandem ST175/80D13 tires w/rims are standard equipment.
  • The X-15 Rake has a proven ground pressure system and rake arm design.
  • The X-15 Rake has 100% coverage, there is no need for center kicker wheels. The 3 wheel extension can be locked up if not needed.
  • One side raking can be done with the right or left side.
  • The hydraulic beam angle kit adjusts right and left beam angles.
  • An electric-over-hydraulic toggle switch adjusts the left and right beam angle – the neutral position of the toggle switch adjusts main frame width.
  • Optional rake wheel wind boards help to keep the crop from wrapping on the rake wheels.
  • Work lights are optional.
      • Hydraulic Beam

        X-Series Rakes have a hydraulic adjust beam angle as standard equipment.

      • Hydraulic Beam

        X-Series Rakes have a hydraulic adjust beam angle as standard equipment.

      • Short Turning Radius

        The H&S X-15 Rake features a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of Crop.

      • Short Turning Radius

        The H&S X-15 Rake features a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of Crop. The variable main frame width adjustment opens symmetrically. Hitch height and beam fore and aft tilt are controlled by a simple ratchet jack.

      • Tires

        Tandem ST175/80D13 tires w/rims are standard equipment.

      • Tires

        Tandem ST175/80D13 tires w/rims are standard equipment.

      • Toggle Switch

        Toggle switch up adjusts left beam angle. Toggle switch neutral adjusts main frame width. Toggle switch down adjusts right beam angle.

      • Toggle Switch

        Toggle switch up adjusts left beam angle. Toggle switch neutral adjusts main frame width. Toggle switch down adjusts right beam angle.

X-15
WHEEL DIAMETER 55"
TEETH PER WHEEL 40
TOOTH DIAMETER 7mm (.275")
RAKE WHEEL HUBS Tapered Roller Bearings
TRANSPORT WIDTH 10' 4"
TRANSPORT LENGTH 31' 6"
WINDROW WIDTH ADJUSTMENT Up to 46"
RAKING WIDTH Up to 25'
HITCH JACK Standard
STANDARD TRANSPORT WHEELS (4-Tandem) ST175/80D13
WEIGHT 3023#
RAKE WHEEL WIND GUARDS Optional
TRANSPORT LIGHTS Optional
HORSEPOWER REQUIREMENTS 40 (30kW)
HYDRAULIC REQUIREMENTS 1 Double acting remote for main frame open and close. 1 Single acting remote for rake wheel lift.
ELECTRICAL REQUIREMENTS + 12 volt power source for hydraulic beam angle kit.

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Optional Light Kit

Optional rake wheel wind boards help to keep the crop from wrapping on the rake wheels.