Action V-Rakes
3100 Series

  • High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
  • An Adjustable Hitch allows you to level the rake for efficient raking.
  • Right and left side raking is done easily by turning either one of the wing transport valves off.
  • A 49″ Center Kicker Wheel is optional on all Action Rakes.
  • The hitch jack is used to adjust the windrow width as shown.
  • Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
  • The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.
      • Hitch Jack

        The hitch jack is used to adjust the windrow width as shown. Raking width is easily adjusted by a single pin & clip.

      • Hitch Jack

        The hitch jack is used to adjust the windrow width as shown. Raking width is easily adjusted by a single pin & clip.

      • Single Hand Crank

        The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single hand crank.

      • Single Hand Crank

        The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single hand crank.

      • Wing Transport Valve

        RIGHT and LEFT side raking is done easily by turning either one of the wing transport valves off.

      • Wing Transport Valve

        RIGHT and LEFT side raking is done easily by turning either one of the wing transport valves off.

3108
NUMBER OF WHEELS 8
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 10′
TRANSPORT LENGTH 19′
TRANSPORT HEIGHT IN TRANSPORT POSITION 86″
RAKING WIDTH 15′ - 19′
WINDROW WIDTH ADJUSTMENT 3′ - 5′
NO. OF RAKING POSITIONS 6
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Independent wheel flotation with single side adjustment crank
ACTION CYLINDER - RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 1,800#
CENTER KICKER WHEEL Optional
TRANSPORT WHEELS (2) - ST205/75D15
ADJUSTABLE BALL HITCH Optional
3110
NUMBER OF WHEELS 10
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 10′ 8″
TRANSPORT LENGTH 21′
TRANSPORT HEIGHT IN TRANSPORT POSITION 101″
RAKING WIDTH 18′ - 22′
WINDROW WIDTH ADJUSTMENT 3′ - 6′
NO. OF RAKING POSITIONS 10
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Independent wheel flotation with single side adjustment crank
ACTION CYLINDER - RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 2,000#
CENTER KICKER WHEEL Optional
TRANSPORT WHEELS (2) - ST205/75D15
ADJUSTABLE BALL HITCH Optional
3112
NUMBER OF WHEELS 12
WHEEL DIAMETER 60″
TEETH PER WHEEL 40
TOOTH DIAMETER 7.5mm
RAKE WHEEL HUBS Tapered Bearings
TRANSPORT WIDTH 12′
TRANSPORT LENGTH 23′
TRANSPORT HEIGHT IN TRANSPORT POSITION 105″
RAKING WIDTH 20′ - 24′
WINDROW WIDTH ADJUSTMENT 3′ - 6′
NO. OF RAKING POSITIONS 10
GROUND PRESSURE RAKE WHEEL ADJUSTMENT Independent wheel flotation with single side adjustment crank
ACTION CYLINDER - RAISE/LOWER 4 ½″
WING CYLINDERS 2″
JACK Standard
WEIGHT 2,250#
CENTER KICKER WHEEL Optional
TRANSPORT WHEELS (2) - ST205/75D15
ADJUSTABLE BALL HITCH Optional

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

A 49″ Center Kicker Wheel is optional on the 1100, 2100, and 3100 Series Rakes.