M9 Merger

  • The M9 merger features a 9′ pick-up head with independent head flotation.
  • The 42″ cross conveyor allows for hi-capacity of crop discharge.
  • All H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.
  • Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.
  • The pick-up head crop roller is adjustable for height and tension.
  • Cross conveyor speeds up when pickup speed is increased.
  • By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.
  • Storage for the inverter shield is out of the way behind the machine.
  • The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.
  • The pick-up head crop roller is adjustable for height and tension.
  • Taillights are standard equipment.
  • An optional self-contained hydraulic drive kit with PTO pump can be installed on the M9 Merger. This feature allows tractors with a minimum 5 g.p.m. hydraulic capacity and 1 remote to operate the merger.
  • An optional 2′ extension or accelerator roller (patented) fluffs windrows. Both options allow you to merge up to 14′ cuts of hay windrowed up to 9′.
      • Anti Wrap Guard

        H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.

      • Anti Wrap Guard

        H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.

      • Crop Roller

        The pick-up head crop roller is adjustable for height and tension.

      • Crop Roller

        The pick-up head crop roller is adjustable for height and tension.

      • Cross Conveyor

        A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material.

      • Cross Conveyor

        A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material. A cross conveyor shut-off is optional on all Hydra-Swing Mergers.

      • Gauge Wheel

        The gauge wheels and Hydra-Swing Crop Roller are easily set to crop conditions just by removing and replacing the pins in the desired setting.

      • Gauge Wheel

        The gauge wheels and Hydra-Swing Crop Roller are easily set to crop conditions just by removing and replacing the pins in the desired setting. The Crop Roller is standard on Hydra-Swing models and optional.

      • Right To Left

        By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.

      • Right To Left

        By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.

      • Swivel Tail Wheel

        The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.

      • Swivel Tail Wheel

        The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.

      • Three Prong Plastic Teeth

        Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.

      • Three Prong Plastic Teeth

        Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.

M9 Merger
BASE UNIT WIDTH 14′4″
BASE UNIT HEIGHT 4′6″
BASE UNIT LENGTH 19′3″
BASE UNIT WIDTH w/ACCELERATOR ROLLER 15′9″
BASE UNIT WIDTH w/OPTIONAL 2' CONVEYOR EXTENSION 16′4″
BASE UNIT WEIGHT 2970 LBS.
BASE UNIT WEIGHT - SELF CONTAINED UNIT 3380 LBS.
TIRE SIZE (FRAME) 6.70 X 15
TIRE SIZE (PICKUP 5.70 X 8
PICKUP WIDTH 9′
REPLACEABLE THREE PRONG PLASTIC TEETH YES
CROSS CONVEYOR WIDTH 42″
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED STANDARD UNIT MIN. - 70 H.P. w/16 G.P.M./2000 P.S.I.
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED WITH SELF CONTAINED UNIT MIN. - 70 H.P. w/5 G.P.M./2000 P.S.I.
HYDRAULIC REMOTES NEEDED - STANDARD UNIT 2
HYDRAULIC REMOTES NEEDED - SELF CONTAINED UNIT 1

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

The optional accelerator roller (patented) fluffs windrows and allows you to merge up to 14′ cuts of hay windrowed up to 9′.

An optional self contained hydraulic drive kit with P.T.O. pump can be installed on the H&S M-9 Merger. This feature allows tractors with a minimum 5 G.P.M. hydraulic capacity and 1 remote to operate the merger.

Storage for the inverter shield is out of the way behind the machine. The optional left side inverter shield can easily be mounted on the M9 Merger.