Hydra-Swing Mergers

  • H&S Hydra-Swing Mergers distribute material smoothly and evenly without bunching. Save time and money by combining 2 or 3 windrows from 9′ to 18′ cuts.
  • With the Hydra-Swing style tongue, the merger can be pulled directly behind the tractor or swung out to the right to fit your operation. Hydraulically folding the optional 2′, 4′, or 6′ extension out of the way, and turning the hydraulic valve to the off position, the Hydra-Swing Merger’s unique design can also be used for merging small mower conditioner windrow applications.
  • A tractor mounted electric control box directs hydraulic oil flow to swing the tongue or raise and lower the pickup on the Hydra-Swing Mergers.
  • An optional self-contained hydraulic drive kit with P.T.O. pump is available. This feature allows tractors with a minimum 5 G.P.M. hydraulic capacity and 1 remote to operate the merger.
  • A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material. A cross conveyor shut-off is optional on all Hydra-Swing Mergers.
  • Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.
  • The gauge wheels and crop roller are easily set to crop conditions just by removing and replacing the pins in the desired setting.
  • The pick-up head crop roller is adjustable for height and tension.
  • Both models feature independent head flotation and a 42″ cross conveyor belt for hi-capacity.
  • The cross conveyor speeds up when the pickup speed is increased.
  • The right hand side merges, and with the optional inverter shield, the left hand side inverts.
  • Transport lights are standard equipment.
      • Anti Wrap Guard

        H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.

      • Anti Wrap Guard

        H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.

      • Control Box

        A tractor mounted electric control box directs hydraulic oil flow to swing the tongue or raise and lower the pickup on the Hydra-Swing Mergers.

      • Control Box

        A tractor mounted electric control box directs hydraulic oil flow to swing the tongue or raise and lower the pickup on the Hydra-Swing Mergers.

      • Crop Roller

        The pick-up head crop roller is adjustable for height and tension.

      • Crop Roller

        The pick-up head crop roller is adjustable for height and tension.

      • Cross Conveyor

        A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material.

      • Cross Conveyor

        A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material. A cross conveyor shut-off is optional on all Hydra-Swing Mergers.

      • Gauge Wheel

        The gauge wheels and Hydra-Swing Crop Roller are easily set to crop conditions just by removing and replacing the pins in the desired setting.

      • Gauge Wheel

        The gauge wheels and Hydra-Swing Crop Roller are easily set to crop conditions just by removing and replacing the pins in the desired setting. The Crop Roller is standard on Hydra-Swing models and optional.

      • Right To Left

        By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.

      • Right To Left

        By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.

      • Swivel Tail Wheel

        The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.

      • Swivel Tail Wheel

        The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.

      • Three Prong Plastic Teeth

        Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.

      • Three Prong Plastic Teeth

        Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.

HSM9
BASE UNIT WIDTH 14′4″
BASE UNIT WIDTH w/2′ OPTIONAL EXTENSION EXTENDED 16′4″
BASE UNIT WIDTH w/4′ OPTIONAL EXTENSION EXTENDED 18′4″
BASE UNIT WIDTH w/6′ OPTIONAL EXTENSION EXTENDED 20′4″
BASE UNIT WIDTH w/OPTIONAL EXTENSION FOLDED 14′10"
BASE UNIT HEIGHT 5′3″
BASE UNIT LENGTH - POLE SWUNG IN 22′
BASE UNIT LENGTH - POLE SWUNG OUT 21′
BASE UNIT WEIGHT - STANDARD UNIT 3095 LBS.
BASE UNIT WEIGHT - SELF CONTAINED UNIT 3515 LBS.
TIRE SIZE (FRAME) (1)6.70 X 15 & (2)9.5L X 15
TIRE SIZE (PICKUP) 5.70 X 8
PICKUP WIDTH 9′
REPLACEABLE THREE PRONG PLASTIC TEETH YES
CROSS CONVEYOR WIDTH 42"
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED STANDARD UNIT MIN. - 70 H.P. w/16 G.P.M./2000 P.S.I.
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED WITH SELF CONTAINED UNIT MIN. - 70 H.P. w/5 G.P.M./2000 P.S.I.
HYDRAULIC REMOTES NEEDED - STANDARD UNIT 2
HYDRAULIC REMOTES NEEDED - SELF CONTAINED UNIT 1
HSM12
BASE UNIT WIDTH 15′4″
BASE UNIT WIDTH w/2′ OPTIONAL EXTENSION EXTENDED 17′4″
BASE UNIT WIDTH w/4′ OPTIONAL EXTENSION EXTENDED 19′4″
BASE UNIT WIDTH w/6′ OPTIONAL EXTENSION EXTENDED 21′4″
BASE UNIT WIDTH w/OPTIONAL EXTENSION FOLDED 15′10″
BASE UNIT HEIGHT 5′3"
BASE UNIT LENGTH - POLE SWUNG IN 22′
BASE UNIT LENGTH - POLE SWUNG OUT 21′
BASE UNIT WEIGHT - STANDARD UNIT 4173 LBS.
BASE UNIT WEIGHT - SELF CONTAINED UNIT 4593 LBS.
TIRE SIZE (FRAME) (1)6.70 X 15 & (2)9.5L X 15
TIRE SIZE (PICKUP) 5.70 X 8
PICKUP WIDTH 12′
REPLACEABLE THREE PRONG PLASTIC TEETH YES
CROSS CONVEYOR WIDTH 42"
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED STANDARD UNIT MIN. - 70 H.P. w/16 G.P.M./2000 P.S.I.
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED WITH SELF CONTAINED UNIT MIN. - 70 H.P. w/5 G.P.M./2000 P.S.I.
HYDRAULIC REMOTES NEEDED - STANDARD UNIT 2
HYDRAULIC REMOTES NEEDED - SELF CONTAINED UNIT 1

WARRANTY: SEE OERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Hydraulically folding the optional 2′, 4′, or 6′ extension out of the way, and turning the hydraulic valve to the off position, the Hydra-Swing Merger's unique design can also be used for merging small mower conditioner windrow applications.

An optional self contained hydraulic drive kit with P.T.O. pump can be installed on the H&S Hydra-Swing Mergers. This feature allows tractors with a minimum 5 G.P.M. hydraulic capacity and 1 remote to operate the merger.

Storage for the inverter shield is out of the way behind the machine. The optional left side inverter shield can easily be mounted on the Hydra-Swing Mergers.