TRI-FLEX TRIPLE HEAD MERGERS
Available in 30' & 35' Models.
Cab Mounted Control Box.
Rotary Steering Sensor.
The self-contained hydraulic system has an 75 gallon reservoir.
Either 1-3/8" or 1-3/4" 1000 rpm PTO runs the 3 – Low volume 7 GPM Pumps w/ High Torque Motors pumps that drive the 3 heads.
3-point hitch is CAT 2, CAT3/N, or CAT3.
The 3 heads on both 30' and 35' Tri-Flex Merger are divided into equal lengths.
An Auto Lube System greases 80% of the Tri-Flex Merger.
All heads are approximately 31" in diameter with an 8" drop to the cross conveyor.
The Tri-Flex features a heavy duty steerable axle. When the Tri-Flex Merger is folded into transport position, the steering system is locked out for transport.
The center cam and center drive (patent pending) system runs at 80 rpm's for an even flow of material.
Hydraulic motors on the ends of each fluted roll, drive the 42" wide rubber w/nylon cord cross conveyor belt. A guide groove keeps the belt aligned.
The 6 tine bars have graphite impregnated nylon split bearings and feature U-shaped rubber teeth.
The elliptical shaped skid shoes are hydraulically adjusted from the electric control box.
Tire options include 16.5 x 16.1 or BKT AW711.